The reason for the damage of the led lamp tube can be understood at a glance, so as to avoid the trap of buying lamps
Apr 21, 2023
The reason for the damage of the led lamp tube can be understood at a glance, so as to avoid the trap of buying lamps
1. One of the reasons for the damage of the led lamp tube: inferior lamp beads
Led lamp beads are not good, and other spare parts such as aluminum substrates, drivers, and shell kits are useless no matter how good they are.
The main manifestations of poor LED lamp beads are 1: the luminous efficiency is extremely low, and the luminous flux is not high, even lower than the luminous efficiency of traditional fluorescent lamps. Even if the power reaches 20W30W, the luminous flux (brightness) is still very low. Users find it after buying and installing. Dimmer than the original fluorescent lamp;
The main manifestation of poor LED lamp beads is 2: the overall color rendering is low, and it looks blue, dark, or purple;
The main manifestation of poor LED lamp beads is 3: the light decay is very large, and the brightness drops by more than half in half a year;
The main manifestation of bad LED lamp beads is 4: the lamp beads are easy to die, and the appearance performance is that some parts are not bright or a certain section is not bright;
The main reason for the poor quality of LED lamp beads: the small size of the LED lamp bead chip leads to low light efficiency and large light decay; cheap PP and low-quality PPA plastic brackets are fragile and cause internal wires to break and fail, and the solder pads are made of iron brackets, which are easy to oxidize Rusting and vulcanization lead to low light output, dark and purple, and poor thermal conductivity, high chip temperature, and large light decay;
2. The second reason for the damage of the led lamp tube: the built-in drive power supply has a short life and no protection
Main manifestations of poor built-in driving power supply of led lamps 1: It starts to flicker after a few months of use, or slightly better after a year and a half, and the light is completely dead after a few months of flickering; the main reason is the life of the driving capacitor used Very short, low-end products on the market drive electrolytic capacitors have been as low as 2000-3000 hours; normal use is usually about 5000-6000 hours of electrolytic capacitors, usually can be used for about three years; must be used for lighting at 105 degrees 10,000 hours, usually life expectancy of more than five years.
The main manifestation of the poor built-in driving power supply of the led lamp tube 2: not long after it is installed, some lights begin to be damaged for no reason, especially in summer thunderstorms, or occasions where large-scale equipment is frequently started and stopped, and there are occasions with large surges; The main reason is that the output has no electrolytic capacitor, and the ripple added to the lamp bead is very large. The large ripple can easily cause the lamp bead to die accidentally. In addition, there is no effective surge absorbing circuit at the input end of the 220V power supply, or it is completely The simple rectification and current limiting has no protection, and a surge may kill a large area; the pre-stage of the built-in drive circuit of Biwei Lighting is equipped with a large-capacity absorption circuit, which has reached the highest indoor lightning protection and surge protection level of 2500V. In addition, a 2.2uF/400V ripple absorbing circuit is installed at the output end, so that accidental damage rarely happens to the LED lamps that must be illuminated.
The above two are fatal reasons for the damage of LED lamps.
3. How do users choose unbreakable LED tubes?
When users buy, they usually pay attention to a few points: (1) How much is the luminous efficacy, whether it can reach about 140-150lm/W (the current ultra-high luminous efficacy in the industry), or about 60-80 (the current low-end products in the industry), Or the 95-100lm/W that first-line brands mainly promote in China; (2), whether the drive is constant current, how long is the life of the electrolytic capacitor, is it 2000-3000 hours, 5000-6000 hours or 8000-10000 hours, it is directly related to The final lifespan of LED lamps.
(1), large-capacity varistor plus current-limiting resistor, lightning protection and surge protection indoor high 2500V, calmly deal with thunderstorms and occasions where large motors start and stop;
(2) The output terminal of the power supply is connected with a large-capacity electrolytic capacitor to prevent ripple damage to the LED lamp beads;
(3) High-brightness lamp beads, large-area LED lamp bead chips, luminous flux up to 32lm/piece, lamp bead luminous efficacy 180lm/W, and finished product luminous efficacy about 145lm/Wd, all of which are ultra-high luminous efficacy in the industry, and 9W can completely replace the market First-line brand 18-22W, users can save more than 78 degrees of electricity every year, and the entire life cycle can save more than 450 degrees of electricity; 18W brightness is 2.5 times to 3 times the brightness of ordinary first-tier brands;
(4) The built-in MOS 5 ohm internal resistance of the driver is far lower than the industry's 12 ohms or 9 ohms, and the current can reach 2A, which is much higher than the industry's 0.8A. Correspondingly, the efficiency is as high as 94.8%, and the redundancy and efficiency are far greater than those of the same industry. , low heat generation, large redundancy of driving constant current chip, not easy to be damaged;
(5) The built-in electrolytic capacitor of the LED lamp drive is resistant to high voltage and high temperature of 105°C. The actual service life is more than 100,000 hours, which can ensure no damage for five years. No flash, five-year warranty.



