Color Tolerance, Correlated Color Temperature, Color Bin Color Temperature
Feb 23, 2023
Color Tolerance, Correlated Color Temperature, Color Bin Color Temperature
Correlated color temperature: We can see that the color of the light emitted by the light source and the color of the light emitted by the black body are not always the same, sometimes they are similar. At the closest time, it is reflected on the chromaticity diagram that the color distance is the shortest. We call the color temperature of the black body at this time the correlated color temperature. The full English name is correlated color temperature, which is the abbreviation CCT that we often use. This shortest color distance is called color deviation, English is Duv, Duv has positive and negative points, if the position of the light source is above the black locus, that is, above the Planck curve, it is defined as a positive value, and the light is yellowish green. The position is below the black locus, that is, the Planck curve, which is defined as a negative value, and the color is purple. Even for light with the same color temperature, the greater the difference in Duv, the more obvious the color difference. That's why we feel the light is so different for lamps with the same color temperature. Using color temperature to describe light is relatively rough, and concepts such as color tolerance will be introduced later. There are many reasons for the difference in color temperature, such as the magnitude of the current, the color temperature drift of the lamp during the working process, but the original reason is the light source chip and its formation in the package. Therefore, choosing lamps of the same model, the same model, and the same batch can avoid the difference in light color to the greatest extent.
Color tolerance: It is a concept closely related to color temperature. This concept was originally proposed by Kodak in the industry, English is Stanard Deviation of Color Matching, referred to as SDCM. It is the difference between the computer calculated value and the standard value of the target light source. That is to say, the color tolerance has a specific reference target light source. The photochromic equipment analyzes the color temperature range of the measured light source, and then determines the standard spectral color temperature value. When the color temperature is the same, determine the value of its color coordinate xy and the difference from the standard light source. The greater the color tolerance, the greater the color difference. The unit of this color tolerance is SDCM,. Color tolerance determines the variance in light color of a batch of luminaires. A color tolerance range is usually shown on a graph as an ellipse rather than a circle. Generally, professional equipment includes integrating spheres to measure specific data, and some LED packaging factories and lighting factories have related professional equipment.
In the LED chip packaging factory, usually according to the standard state, under the state of 25 degrees LED junction temperature and standard driving current, the LED lamp beads are divided into Bins, usually divided into 6-16 Bins (color bins). The light color of the bin area is more consistent, and the light color difference between adjacent bin areas is smaller. However, binning work means an increase in cost. Therefore, due to the large base, generally large manufacturers can usually obtain more consistent light sources in the bin area. In the initial stage, the color tolerance is smaller.
However, there are many factors that affect the color tolerance, such as the LED chip, the phosphor ratio, the driving current change, the structure of the lamp will also affect the color temperature, the heat dissipation of the lamp will affect the change of the color temperature, mainly due to insufficient heat dissipation, As a result of reduced brightness and accelerated aging of the light source, the color temperature of the LED will also drift during the lighting process, so some lamps now consider the color temperature and measure the color temperature of the lighting state in real time. Color tolerance standards include North American standards, IEC standards, European Meng standards and so on. Our general requirement for LED color tolerance is 5SDCM. Within this range, our eyes can basically distinguish chromatic aberration.
Correlated color temperature allows us to understand that lamps with the same color temperature may have very different light colors. Therefore, in order to ensure that the color difference is not too large, the concept of color tolerance is introduced. So we say that the color temperature range is required to be small, which is not enough, and the more accurate color tolerance should be small, within 5SDCM. The difference in color temperature is due to the difference in the distribution of the components that make up the light. Usually, the difference of 1SDCM is difficult for us to detect, the difference of 2 to 4SDCM is not particularly obvious, and the difference of 5SDCM is relatively easy to distinguish, which is why our standard emphasizes that the color temperature difference is within 5SDCM.





