
Integrated LED Street Light With Built-in Battery
Integrated LED Street Light with Built-in Battery is an advanced off-grid lighting system designed for locations where grid power is unstable, unavailable, or costly to deploy. It integrates LED lighting, lithium battery storage, intelligent power management, and charging control into a single compact structure.
Off-Grid Self-Powered Lighting System for Municipal and Infrastructure Projects
Integrated LED Street Light with Built-in Battery is an advanced off-grid lighting system designed for locations where grid power is unstable, unavailable, or costly to deploy. It integrates LED lighting, lithium battery storage, intelligent power management, and charging control into a single compact structure.
Unlike traditional grid-connected street lights, this system operates as a self-powered lighting unit, capable of delivering stable illumination even during power outages or in remote environments.
It is widely used in rural electrification, highways, mining zones, islands, and emergency infrastructure projects across Europe, the Middle East, Africa, and global EPC markets.
System Architecture
The Integrated LED Street Light with Built-in Battery is not a standalone luminaire but a complete energy lighting system.
Core System Components
LED optical lighting module
Integrated lithium battery pack
Smart charging and discharging controller
Battery Management System BMS
Light sensor and optional motion sensor
Thermal protection system
Engineering Design Logic
The system is designed around three core engineering principles
Energy independence through integrated storage
Stable discharge performance under varying load conditions
Intelligent energy allocation based on lighting demand
Operating Principle
During daytime, the system stores energy in the built-in battery through solar or grid charging depending on configuration. At night, the BMS system manages controlled discharge to ensure stable lighting performance throughout the operating cycle.
Key Advantages
Off-Grid Independence
The system operates without requiring continuous grid connection, making it suitable for remote or undeveloped infrastructure zones.
Reduced Infrastructure Cost
No trenching, cabling, or external power distribution systems are required, significantly reducing civil engineering costs.
High Reliability in Power Outages
The built-in battery ensures continuous lighting during grid failure conditions, making it suitable for emergency infrastructure.
Fast Deployment Capability
Installation does not require electrical grid integration, allowing rapid deployment in time-sensitive projects.
Product Variants
Standard Battery Integrated LED Street Light
Designed for general municipal and rural road lighting applications with balanced capacity and cost efficiency.
Solar + Battery Hybrid Street Light
Combines solar charging with battery storage for fully renewable off-grid operation.
Smart Battery LED Street Light
Equipped with IoT remote control, dimming scheduling, and energy monitoring functions.
High Capacity Battery Street Light
Designed for extended backup duration and low-sunlight environments.
Technical Specifications
Electrical Parameters
|
Parameter |
Specification |
|
Input Voltage |
DC system / AC optional |
|
Power Range |
20W–150W |
|
Charging Method |
Solar / Grid hybrid |
|
Power Control |
Smart BMS system |
Optical Parameters
|
Parameter |
Specification |
|
Luminous Efficacy |
130–170 lm/W |
|
Color Temperature |
2700K–5700K |
|
CRI |
≥70 / ≥80 optional |
|
Beam Angle |
Type II / Type III / Type V |
Battery System Parameters
|
Parameter |
Specification |
|
Battery Type |
LiFePO4 lithium battery |
|
Capacity Range |
400Wh–2000Wh optional |
|
Cycle Life |
≥2000–4000 cycles |
|
Protection System |
BMS integrated protection |
|
Backup Duration |
1–5 nights depending on configuration |
Applications
Rural Electrification Projects
Ideal for regions without stable grid infrastructure where traditional lighting installation is cost-prohibitive.
Remote Highway Systems
Provides lighting in long-distance road segments where power grid access is limited.
Mining and Industrial Zones
Ensures stable lighting in isolated operational environments.
Island and Coastal Regions
Suitable for areas where grid expansion is technically difficult or economically inefficient.
Emergency and Disaster Relief Lighting
Provides independent lighting during power outages and post-disaster recovery operations.
Smart Off-Grid City Zones
Supports decentralized smart city infrastructure with independent energy nodes.
Battery Engineering System
The built-in battery system is designed for long-term industrial reliability.
Battery Management System (BMS)
Protects against overcharge, over-discharge, over-current, and thermal instability.
Thermal Control Design
Ensures stable battery performance under extreme temperatures ranging from -40°C to +50°C.
Cycle Life Optimization
Battery chemistry and discharge curves are optimized for long service life and stable degradation.
Safety Encapsulation
Sealed structure prevents water ingress, dust contamination, and mechanical damage.
Energy Management Logic
The system uses intelligent energy distribution logic:
Daytime charging through solar or grid input
Nighttime controlled discharge
Adaptive dimming based on motion detection
Energy saving mode under low battery conditions
This ensures maximum operational efficiency under varying environmental conditions.
Installation and Deployment Advantages
No trenching or underground cable installation required
No grid connection approval required in off-grid configurations
Reduced installation labor and equipment requirements
Fast deployment suitable for emergency or large-scale projects
Standard pole compatibility for global infrastructure use
ROI and Cost Advantage
|
Parameter |
Traditional System |
Battery Integrated System |
|
Cable installation cost |
High |
None |
|
Grid dependency |
Required |
Not required |
|
Installation time |
Long |
Short |
|
Maintenance frequency |
Medium |
Low |
|
Emergency capability |
None |
Built-in |
Key economic benefits include reduced infrastructure cost, faster project deployment, and lower long-term maintenance expenditure.
Smart Control System
The system supports modern intelligent lighting infrastructure:
IoT remote monitoring
DALI or PWM dimming control
Motion sensor integration
Scheduled lighting operation
Battery status monitoring
Certifications and Compliance
Designed for international infrastructure standards:
CE certification
RoHS compliance
IEC 60598 lighting safety standard
UN38.3 lithium battery transportation certification
ISO 9001 quality management system
These certifications ensure safety, reliability, and compliance for global EPC projects.
Buying Guide
Battery Capacity Selection
Smaller capacity for urban backup lighting
Medium capacity for rural roads
High capacity for remote or multi-day autonomy requirements
Lighting Power Selection
20W–60W for residential
60W–100W for urban roads
100W–150W for highways
Backup Duration Selection
1 night standard configuration
2–3 nights for stable off-grid operation
4–5 nights for extreme environments
FAQ
OEM and Engineering Support
We provide full technical support for B2B projects:
Dialux lighting simulation
Battery configuration design
IES photometric files
EPC project documentation support
OEM and ODM customization
Sample testing and validation
Ordering Process
Requirement analysis and site evaluation
Technical configuration selection
Sample production and testing
Engineering approval and confirmation
Mass production and quality inspection
Global delivery and installation support
Hot Tags: integrated led street light with built-in battery, China integrated led street light with built-in battery manufacturers, suppliers, factory, 150Lm W High Efficiency Intelligent Utility Grade Street Light, Flexible Joint Die Cast Outdoor Roadway LED Luminaire, Rugged Structure Extreme Weatherproof Coastal Roadway Luminaire, soccer field lights, solar powered led street light, Street LightMeanWell Driver High Reliability Full Cutoff Coastal LED
Send Inquiry







